Forensic Talon: The forensic Talon, clearly demonstrates the evolution of computer forensic technologies. This powerful forensic hard drive acquisition system is specifically designed for the requirements of law enforcement, military, MIS/IT, corporate security, investigators and auditors. At 4GB/min. (UDMA -5), the Talon simultaneously captures and verifies data on IDE/UDMA/ SCSI/SATA, 1.8", 2.5" and compact flash drives. The new Talon raises the bar on hardware based data capturing systems. With "DD" imaging and SHA-256 verification, the new Logicube Talon is the most powerful and versatile forensic data capturing system. The systems non-tampering drive capture ensures bit-for-bit accuracy, guaranteeing exact replication of the suspect drive. Validate your capture Now computer forensic investigators can bolster their chain of evidence by specifying when and where their data captures are performed. TheGPStamp® from Logicube® provides a verified fix on the location, time and date of data capture. •Accurately computes the location of the unit in 3D space anywhere in the world with accuracy of 50 meters. .•Provides accurate latitude, longitude and timevalidation, which is added to the Capture Report and the Capture Log. •Is capable of acquiring satellites and fixes within most buildings. •Attaches directly to the parallel port of the Talon and MD5. •An intuitive, easy to use tool. No special training is required. The integrated viewscreen offers information such as satellites acquired and their signal strength, as well as the latitude, longitude, time and date of the satellite fix.   Capture a suspect RAID pair! The unique Logicube®RAID I/O®Adapter enables theLogicube Forensic Talon® to capture a Suspect RAID drive pair directly to 1 Destination drive*, and 1 Suspect drive to 2 Destination drives. •Captures RAID-0, RAID-1 and JBOD configurations. •Supports MD5/SHA-256 scan and keyword search mode during any 1-to-2 capture. •Supports both native and DD image operation modes during 1-to-2 and 2-to-one capturing. •Supports drive defect scan and WipeClean modes during 1-to-2 and 2-to-1 capturing .