The Portable Forensic Lab (PFL) is a complete and compact lab built into a ruggedised carry case. It provides the investigator with a full set of tools needed for capture, analyze and document potentially incriminating evidence from almost any digital source. It is available in a number of well configured and affordable bundled packages:- 1. Complete PFL System with either our MD5 or Talon hard drive Imager, a Laptop and forensic analysis software. 2. Standard PFL System with either our MD5 or Talon hard drive Imager and forensic analysis software. (No Laptop) 3. Stand-alone PFL System and forensic analysis software only. 4. Basic PFL System only no other items. 5, Basic PFL with a Talon or MD5 only (No Laptop or forensic software). BUILT IN CONNECTIVITY! The portable Forensic Lab captures and analyzes: IDE hard drives of any size - Capture at full UDMA speeds (UDMA 4 on the MD5 unit, and UDMA 5 on the Talon unit) Expected transfer rates may exceed 4 GB/min. SERIAL ATA drives of any size SCSI drives of any size. A 68-pin connector is native. Adapters to 50-pin and 80-pin are part of the kit. However speed of copying is slow through the laptop (100MB/min. average) All popular flash media devices: Compact Flash, Microdrive, Memory stick, SD, xD, MMC, etc. These are read by a write-protected card reader. CD/DVD-ROMs - Direct from Laptop. Floppy drives - Either direct from Laptop or through the USB floppy reader. Thumb drives - Directly to Laptop. Drives with USB connectivity. No Dongle is necessary. USB "dongle" is included with unit.